GachaCodex

Arknights: Endfield

Wuling Factory Setup for Outpost Prosperity Level 3

Learn how to set up the updated Wuling Factory to achieve Outpost Prosperity Level 3 in Arknights: Endfield.

Gacha Codex EditorialEditorial team
4 min read

To set up the Wuling Factory and optimize it for Outpost Prosperity Level 3, you need to establish efficient Cuprium and Dense Originium production loops using conduits, seed picking units, and appropriate mineral extraction nodes.

Prerequisites for Wuling Factory Setup

prerequisites

  • Outpost Prosperity Level 3: Ensure your outpost is upgraded to this level for full factory functionality.
  • Upgraded terminals and stations: Upgrade the Environment Monitoring Terminal, Stock Redistribution Terminal, and Recycling Station in their respective areas.
  • Wuling AIC2 components unlocked: Unlock and prepare the components required for the updated setup.

Setting Up Cuprium Production

steps

  1. Place hydro mining rigs: Position hydro mining rigs at Cuprium Ore nodes located in the factory area.
  2. Install fluid pumps and pipe splitters: Use fluid pumps to provide water supplies. Connect up to three mining rigs to a single pump using pipe splitters for efficient distribution.
  3. Set up conduits: Place conduit inlets and outlets for remote mining nodes that lack nearby water sources, connecting them to a fluid pump.
  4. Refine Cuprium Ore: Use water treatment units to refine Cuprium Ore into Cuprium Parts, ensuring sewage from the process is managed properly.

A placement preview of a Hydro Mining Rig near mineral deposits on a grid.

Placement preview of a Hydro Mining Rig near mineral deposits. - IWinToLose Gaming

Dense Originium Powder Production

steps

  1. Utilize Sand Leafs: Place Sand Leafs into seed picking units to generate raw materials for powder production.
  2. Deploy shredding units and depots: Set up multiple shredding units and depots to refine materials into Dense Originium Powder.
  3. Monitor water and sewage levels: Use water treatment units to manage waste byproducts and prevent blockages in production.

An in-game blueprint for Dense Originium Powder production, displayed with placement controls.

The Dense Originium Powder production blueprint is displayed on the screen with its layout for placement. - IWinToLose Gaming

SC Wuling Battery Integration

steps

  1. Replace LC Wuling Batteries: Transition to SC Wuling Batteries for higher power output.
  2. Maintain power levels: Ensure power levels exceed the minimum factory requirement by using the new SC Wuling Batteries.
  3. Redeem stock credits: Use excess batteries to redeem stock credits for endgame resources.

Utilizing Conduit Technology

steps

  1. Deploy conduit outlets and inlets: Use these to distribute water effectively across remote nodes in the factory.
  2. Set up connections manually: Connect conduit lines between inlets and outlets to ensure proper fluid transport.
  3. Ensure pump connectivity: Confirm that all conduits are connected to functional fluid pumps to prevent delivery issues.

Managing Sand Leaf Loops

Seed-picking unit interface showing sand leaves and other resources.

The seed-picking unit screen displays sand leaves in the production interface. - IWinToLose Gaming

Also worth knowing

  • Seed Picking Unit efficiency: Place Sand Leafs into these units to maximize the Sand Leaf Loop output.
  • Extend water pipe ranges: Use pipe splitters to widen water distribution zones without relying solely on conduit systems for Cuprium extraction.
  • Avoid resource waste: Turn off Liquid Xiranite bottling once fluid tank capacity is full to conserve resources and reduce manual toggling.

FAQ

How do I set up the Wuling Factory for Outpost Prosperity level 3?

You need efficient Cuprium and Dense Originium production loops using hydro mining rigs, fluid pumps, conduits, and seed picking units to scale outputs appropriately.

What materials are needed for the new Wuling Factory setup?

Materials include Cuprium Parts, Sand Leafs, SC Wuling Batteries, and Zircon components. Specific counts like 200 Cuprium Parts for inlets and outlets and 12 stacks of Sand Leafs are mentioned.

How do I use conduit outlets and inlets in the Wuling Factory?

Conduit outlets and inlets are used to transfer water across remote nodes. Place them near water sources and mining rigs, then connect their lines manually.

What is the purpose of the SC Wuling Battery in the updated factory?

SC Wuling Batteries provide high power output for the factory and are redeemable for stock credits, serving as both an energy source and a key economic element.

How do I manage sewage and water resources in this factory?

Water treatment units process sewage generated by refining operations. Adequate placement prevents bottlenecks in Cuprium and Originium production.

What are the blueprint codes for NA/EU to set up the updated Wuling Factory?

Specific blueprint codes are stated to be available on NA/EU servers but require manual recreation for the Asia server. Check recent updates or guides for details.

Sources

Screenshots on this page are frames from the videos below, used to illustrate the steps they describe. All rights remain with their creators.

On this page

Continue reading

Arknights: Endfield

Arknights: Endfield Temporary Pyrrolite Blueprint

Use the temporary Wuling Sub-AIC blueprint to start making Pyrrolite Components before the full factory overhaul. This guide covers the unlocks, inputs, output layout, and the resource chain you need to keep it running.

resource planningprogressionbeginner

Arknights: Endfield

Arknights: Endfield Wuling Factory Guide for Outpost 3

Update your Wuling factory blueprint for Outpost Prosperity level 3 by switching over to the new batteries, conduits, and production lines in the right order.

resource planningprogressionefficiency